Credit cards are not waterproof, but they can survive brief water exposure

A credit card dunked in water or caught in rain will usually still work after it dries. The magnetic stripe and chip are sealed under the plastic, so water does not reach them directly. However, prolonged soaking, saltwater, or repeated wet-and-dry cycles can damage the card's internal components and make it unreadable by a card reader.

The real risk is not a single splash but what happens over time. If water gets trapped between the layers of plastic or seeps into the chip's contact points, corrosion can develop. This is why cards left in a washing machine or submerged for hours are more likely to fail than cards that dry out quickly.

If your card gets wet, the best step is to dry it gently with a soft cloth and let it air-dry completely before using it again. Do not use heat like a hair dryer or oven, which can warp the plastic or damage the chip.

Key Takeaways

  • Water exposure alone does not when ready destroy a credit card; the magnetic stripe and chip are sealed inside the plastic.
  • Saltwater, prolonged soaking, and repeated wet-and-dry cycles pose a higher risk of damage than brief freshwater contact.
  • If your card gets wet, dry it gently with a soft cloth and allow it to air-dry completely before swiping or inserting it.
  • If a card stops working after water damage, contact your card issuer to request a replacement card, which usually arrives within 7 to 10 business days.

How water damages the magnetic stripe and chip

The magnetic stripe on the back of your card stores your account information in a thin layer of magnetic particles. This stripe sits just under the card's surface, protected by plastic, but it is not sealed airtight. If water seeps into the edges or sits on the card for hours, it can corrode the magnetic particles and make them unreadable.

The chip (the small metallic square on the front) is more resilient because it sits deeper in the card and has a protective coating. However, water can still damage the tiny contact points where the chip connects to the card reader. Corrosion on these contacts prevents the reader from communicating with the chip, even if the chip itself still works.

Saltwater is more damaging than freshwater because salt accelerates corrosion. A card soaked in ocean water or left in a beach bag with salt spray is at higher risk than one briefly rained on.

What to do when ready after your card gets wet

Remove the card from water as soon as you notice it is wet. Pat it dry with a soft, lint-free cloth—a microfiber cloth works well. Do not rub hard, which can scratch the stripe or chip.

Lay the card flat on a dry surface and let it air-dry for at least 24 hours before using it. Place it somewhere with good air circulation and away from direct sunlight or heat sources. A shelf in a room-temperature area is ideal.

Do not use a hair dryer, oven, or microwave to speed up drying. Heat can warp the plastic, melt the adhesive between layers, or damage the chip's internal circuits. Patience is the safest approach.

Signs your card has water damage

A water-damaged card may still look normal on the outside but fail when you try to use it. The most common sign is a declined transaction at a card reader, even though your account is in good standing and you have available credit.

You might also notice the magnetic stripe looks faded, discolored, or has visible corrosion spots. The chip's contact points may appear tarnished or dull instead of shiny. These visual signs suggest water has reached the internal components.

If your card stops working after water exposure, do not keep trying to use it at different merchants. Each failed swipe or chip read can cause more wear on the damaged components. Instead, contact your card issuer right away.

How to get a replacement card after water damage

Call the customer service number on the back of your card or log into your online account and request a replacement. Tell the issuer the card was damaged by water. Most issuers do not charge a fee for a replacement card due to damage.

The issuer will deactivate your old card when ready to prevent fraud and mail you a new one. Standard replacement cards arrive within 7 to 10 business days. Some issuers offer expedited shipping for an extra fee, which can cut the time to 2 to 3 business days.

Your new card will have the same account number and benefits as the old one. You do not need to reapply or update your credit profile. Any recurring charges linked to the old card will automatically transfer to the new card once it arrives.

How to protect your cards from water damage

Keep your wallet in a waterproof pouch or bag when you are near water—at the beach, pool, or during rain. A straightforward ziplock bag works in a pinch. If you carry multiple cards, store them in a cardholder with a water-resistant coating.

Avoid leaving cards in pockets of clothes you plan to wash. A card left in a jeans pocket and run through the washing machine is exposed to prolonged water and agitation, which increases the risk of damage.

If you live in a humid climate or travel frequently to wet environments, consider requesting a replacement card every few years as a preventive measure. Cards that sit in humid conditions over time can develop internal corrosion even without direct water contact.

Frequently Asked Questions

Can I use my card right after it gets wet?

You can try, but it is risky. If water is still trapped in the card, using it may push water deeper into the chip or stripe. Wait until the card is completely dry before swiping or inserting it. If the card fails, stop using it and request a replacement.

Will my card work if it was in the washing machine?

Possibly, but washing machine exposure is severe—prolonged water contact, heat from the dryer cycle, and physical agitation all increase damage risk. Dry the card completely and test it at an ATM first. If it does not work, contact your issuer for a replacement.

Is a chip card more waterproof than a magnetic stripe card?

Chip cards are slightly more resistant because the chip sits deeper in the card and has better protection. However, both can be damaged by water. The chip's contact points are still vulnerable to corrosion, so neither type is truly waterproof.

What if my card was in saltwater?

Saltwater damage is more serious than freshwater. Rinse the card gently with fresh water to remove salt residue, then dry it thoroughly. Even after drying, saltwater exposure increases the risk of corrosion over time. If the card stops working within a few weeks, request a replacement.

Do I need to cancel my card if it gets wet?

No, unless the card is lost or stolen. Water damage does not compromise your account security—the card just becomes unreadable. You only need to cancel if you cannot locate the card or suspect fraud. For water damage alone, a replacement card is sufficient.